< img src="https://mc.yandex.ru/watch/95524020" style="position:absolute; left:-9999px;" alt="" />

Introduction Of RECOM Power IoT Products And Weixin Technology PD39208 Evaluation Board

6/1/2023 9:33:34 AM

 Introduction 1: Product Introduction Of RECOM Power IoT Products

RECO Internet of Things (IoT) products are energy-efficient AC/DC and DC/DC converters ideally suited for Industry 4.0 and IoT applications. These products provide high efficiency at both light and full loads. IoT relies on distributed intelligence\ Multiple interconnected sensors/actuators and decentralized control. Power supplies for IoT applications need to be space-saving\reliable and efficient at both low and full loads. Many RECOM products are compact\cost-effective AC/DC and DC/DC modules , for IoT and Industry 4.0 applications.


Feature

Small AC/DC and DC/DC Converters

cost effective

Low standby power consumption

Application

internet of things

Riot

Smart Offices and Smart Buildings

Single Battery Powered IoT

Feature

1"x1" or 1"x2" small footprint

Integrated Class A or Class B filters

Application

internet of things

Industry 4.0

Industrial Electrical Equipment

Feature

include

sensor

Actuator

driving force

control node

Feature

Efficiency of 89% or higher

cost effective

Application

internet of things

Riot

battery powered system

Feature

Fine-tuning\sequencing\control and sensing capabilities

EMC filter evaluation

Overload and Overtemperature Evaluation


Application

48V bus

industrial

electron flow



     Brief Introduction 2: Microheart Technology PD39208 And PD39210 Evaluation Board Product Introduction

Microchip 's EV14G15A evaluation board is based on Microchip's PD39208 and PD39210 chipsets. Microchip's PD39208 Power over Ethernet (PoE) manager IC integrates power, analog and advanced logic into a single 56-pin plastic QFN package. The device is available in For Ethernet switches and midspans/injectors, it supports network devices to share power and data over the same Ethernet cable. The PD39208 PoE manager is an 8-port mixed-signal and high-voltage PoE driver. With the PD39210 PoE controller, it can be used as PSE Systems. The Microchip PD39210 PoE Controller is a cost-effective, pre-programmed MCU designed to implement enhanced PoE systems.

Characteristic

Two RJ45 groups (each group contains four RJ45 connectors)

Switch domain is isolated from PoE domain

Switch domain USB interface, connect to PC through Microchip GUI

PoE controller manual reset and serial communication settings

Block Diagram

Declaration: This article is copyrighted by the original author. Reposting this article is solely for the purpose of disseminating more information. If there are any inaccuracies in the author's information, please contact us as soon as possible for correction or removal. Thank you for your attention!