< img src="https://mc.yandex.ru/watch/95524020" style="position:absolute; left:-9999px;" alt="" />
HT ELECTRONICS Cart Cart ( )
HT ELECTRONICS BOMBOM
All Products

Introduction, characteristics, and applications of diode integrated PI5USB212 USB 2.0 signal conditioner

2/21/2024 9:10:00 AM

Summary: Enhance the signal and apply pre-emphasis to resolve ISI signal loss in the channel.

diode integrated PI5USB212 USB 2.0 signal conditioner

The diode-integrated PI5USB212 USB 2.0 signal conditioner enhances the signal and applies pre-emphasis to address ISI signal loss in the pre- and post-conditioning channels. The PI5USB212 uses a patent-pending design that maintains stable common mode with symmetrical boost/pre-voltage D+/D-. This device is versatile and suitable for USB host or device applications, whether remote from the USB PHY or away from the connector point. Depending on channel conditions, boost/pre-emphasis and receiver sensitivity levels can be configured via pins or I(2)C mode. Additionally, it can detect and report device connections and high-speed handshakes successfully.


characteristic

  • 2.3V to 5.5V wide supply voltage range

  • USB interface 5.5V tolerance

  • Low power consumption in disconnect and shutdown modes

  • Compatible with USB 2.0, OTG 2.0, bc1.2

  • Host or device agnostic

  • Enhancement/pre-emphasis level and receiver sensitivity programming via pin mode or I(2)C mode

  • 12-contact, X2QFN (XUA) package

  • Symmetrical boost/preload, emphasizing D+/D- to maintain stable common mode

  • Device connectivity and high-speed detection

  • Supports cable length up to 5m

  • 2KV HBM, 1KV CDM ESD performance

  • Completely lead-free and fully RoHS compliant

  • Halogen-free, antimony-free, green equipment


app

  • laptop

  • personal computer

  • docking

  • cable filler

  • television

  • monitor


block diagram


Declaration: This article is copyrighted by the original author. Reposting this article is solely for the purpose of disseminating more information. If there are any inaccuracies in the author's information, please contact us as soon as possible for correction or removal. Thank you for your attention!

Prve：Introduction, characteristics, and applications of diode-integrated PI3USB31532Q 10Gbps USB Type-C crossbar switch

Next：Introduction, characteristics, and applications of CUI's VGS-200E AC/DC power supply