2/13/2024 9:30:08 AM
Summary: 2.7V to 26V, 2.7 milliohm and 18A integrated hot-swap efes with current monitor and blocking FET driver.
Texas Instruments TPS25983 hot-swappable eFuses are highly integrated circuit protection and power management devices in small packages. These fuses operate over a wide input voltage range of 2.7V to 26V and provide strong protection against overloads, short circuits, voltage surges, reverse current and excessive inrush current. The overcurrent limit threshold can be set with a single external resistor, and overvoltage events are limited by an internal cutoff circuit with a user-adjustable overvoltage threshold. Typical applications include power multiplexing, hot plugging, hot plugging, PCIe risers, add-in cards, router/switch optical module protection, industrial PCs and wireless power tool chargers.
These devices intelligently manage overcurrent response by distinguishing transient events from actual faults. This allows the system to operate uninterrupted during line and load transients without compromising the robustness of protection against faults. The TPS25983 hot-swap fuse is available in a small 4mm × 4mm QFN package and is characterized by operation over a -40°C to 125°C junction temperature range.
2.7V to 26V wide input voltage range:
30V absolute maximum
Low on-resistance:
R(ON) = 2.7 milliohms typical
Adjustable current limit threshold:
Range 2A to 18A
±8% accuracy (typical I(LIM) greater than 5A)
Circuit breaker and current limiter options
Adjustable overcurrent disconnection timer:
Handles load transients without tripping
Accurate current monitoring output:
±1.5% (Typically at 25°C, I(OUT) is greater than 3A)
±3% (maximum value when I(OUT) is greater than 3A)
Adjustable undervoltage lockout
Adjustable overvoltage lockout
User configurable fault response:
Block or auto-retry
Number of retries (limited or unlimited)
Retry interval
Strong short circuit protection:
Fast trip response time is less than 400ns
Immune to line transients - no troublesome trips
Adjustable output slew rate (dVdt) control
Option to drive external FET for reverse current blocking in disabled/off state
Integrated over-temperature protection
Power good indication
Small footprint:
4mm × 4mm QFN package
Hot plug and hot plug
multiplexing of power
Server rail preparation, PCIe riser, expansion card, fan module protection
Router and switch optical module protection
Industrial computer
cordless power tool charger
Phone