2/12/2024 9:00:00 AM
Summary: Features true color XYZ ambient light detection and flicker detection up to 7kHz.
Osram TCS3530 ambient light sensor has flicker detection (up to 7kHz) function and has true color XYZ ambient light detection function. The TCS3530 light sensor uses a small footprint 8-pin optical module with dimensions of 2.50mm x 1.80mm x 1.50mm (LxWxH). Fully embedded optical modules provide an integrated aperture and diffuser. This unparalleled scale of integration, including photodiodes, apertures/diffusers, and the precise distances between these critical optical elements allows for accurate pre-calibration during final optic testing.
The ambient light detection feature provides eight concurrent ambient light sensing channels with independent gain configurations. Channels can be optionally connected to 27x photodiodes covered with UV/IR blocking filters. The built-in sequencer enables automated measurements without the need to reprogram the device after each measurement cycle. The architecture accurately measures ambient light to manage display appearance and calculates illuminance, colorimetric and correlated color temperature (CCT).
The OSRAM TCS3530 light sensor integrates direct detection of ambient light flicker up to 7kHz. This extended sampling range makes it possible to
detect flicker from conventional mains powered 50Hz/60Hz AC light sources or modern PDM controlled LED lighting systems. Flicker detection is performed in parallel with ambient light sensing, providing independent gain configuration. The flicker detection engine collects and buffers flicker frequency calculation data outside the host CPU.
Invisible ambient light and color sensing under glass
UV/IR blocking filters for all channels
clear reference channel
Programmable gain and integration time
8192x dynamic range is adjusted by gain only
Minimum detectable illumination (100ms)
Configurable, high sensitivity
Tailored ALS and color response
ALS/Color Interrupts and Thresholds
Unique fast ALS integration mode provides flicker-immune ambient light sensing with programmable integration time
Integrated status check for all functions with digital and analog ALS saturation flags
Integrated ambient light flicker detection chip
Independently configurable timing and gain
Simultaneous flicker and ALS measurement with simplified readout method
Up to 7kHz flicker detection (14kHz sampling)
FIFO buffer interrupt
Low power consumption, minimal I(2)C traffic (optional I3C mode)
1.8V(BUS) and 1.2V(BUS) operation
Configurable sleep mode
interrupt driver
I²C interface up to 1MHz (Fast-Mode Plus)
On-chip data compression reduces serial bus traffic
CCT and colorimetric calculations
Assisted automatic white balance
Light identification
Flash immune camera operation
1.7V to 1.98V supply voltage range
1.62V to 3.3VI/O supply voltage range
1.08V to 1.98VV(BUS) I/O voltage range
4pF typical input pin capacitance
485µA typical ALS supply current
98µ typical idle current
0.7μA typical sleep current
±5 leakage current
700kHz to 740kHz oscillator clock frequency range
-30℃~ +85℃ operating temperature range
Phone