2/9/2024 9:45:00 AM
Summary: This device allows glue-free connection to the most commonly used graphics controllers.
The Texas Instruments TFP410 PanelBus digital transmitter is a PanelBus flat panel display product, an end-to-end DVI 1.0 compliant solution targeting the consumer electronics and personal computer industries. The TFP410 device provides a universal interface allowing glue-free connection to the most commonly used graphics controllers. Some advantages of this versatile interface include selectable bus widths, adjustable signal levels, single-ended and differential clocking. The adjustable 1.1V to 1.8V digital interface provides a high-speed, low-emi bus that can be connected to a 24-bit or 12-bit interface. The DVI interface supports flat panel display resolutions up to UXGA 165MHz, 24-bit true color pixel format.
The TFP410 device combines PanelBus circuit innovation, Texas Instruments ultra-low inductance PowerPAD packaging and advanced 0.18µm EPIC-5 CMOS process technology. The result is a compact 64-pin TQFP package that provides a reliable, low-noise, low-current, high-speed digital interface solution.
Digital Visual Interface (DVI) compatible
Supports pixel rates up to 165MHz (including 1080p and WUXGA at 60Hz)
Universal Graphics Controller Interface
12-bit, bilateral and 24-bit, unilateral input modes
Adjustable 1.1V to 1.8V and standard 3.3V CMOS input
signal level
Fully differential and single-ended input clock modes
Standard Intel 12-bit digital video port compatible with Intel 81x chipset
Enhanced phase-locked loop immunity
On-chip regulator and bypass capacitors to reduce system cost
Enhance jitter performance
No HSYNC jitter anomaly
Negligible data-related jitter
Programmable using I(2)C serial interface
Monitor detection via hot plug and receiver detection
Single 3.3V power supply operation
64-pin TQFP in TI's PowerPAD package
TI's advanced 0.18µm EPIC-5 CMOS process technology
Pin compatible SiI164 DVI transmitter
DVD
Blu-ray
HD projector
DVI/HDMI transmitter (HDMI video only)
Phone