2/8/2024 9:05:19 AM
Summary: Provides 4A peak source and 6A peak sink current to drive power MOSFET, SiC, GaN and IGBT transistors.
The Texas Instruments UCC21550 dual-channel gate driver is an isolated driver with programmable dead time and a wide -40°C to 150°C temperature range. These gate drivers are designed with 4A peak source and 6A peak sink current to drive power MOSFET, SiC, GaN and IGBT transistors. The UCC21550 driver is an opto-isolated gate driver that can be configured as two low-side drivers, two high-side drivers, or as a half-bridge driver. The input side is isolated from the two output drivers by a 5kV (RMS) isolation barrier with a minimum common-mode transient immunity (CMTI) of 125V/ns. These gate drivers are ideal for onboard battery chargers, high voltage DC-DC converters, automotive HVAC and body electronics.
Protection features of the UCC21550 driver include resistor-programmable dead time, a disable function that turns off both outputs simultaneously, and an integrated de-fault filter that rejects input transients shorter than 5ns. These gate drivers achieve high efficiency, high power density and robustness in a variety of applications.
4A peak source and 6A peak sink output
Common mode transient immunity (CMTI) greater than 125V/ns
Dual low-side, dual high-side, or half-bridge driven
UVLO protection for all power supplies
Quickly disable power sequencing
Recommended input voltage is minimum 3V and maximum 5.5V
25V output voltage
Junction temperature range -40℃~150℃
Maximum power consumption 950mW
Switch parameters:
Typical propagation delay 33ns
Maximum pulse width distortion 5ns
Maximum V(DD) power-on delay 10µs
car battery charger
High voltage DC-DC converter
Automotive HVAC and body electronics
Phone